Frenchie11
Frenchie11
04-06-2018
French
contestada
Are all of these answers correct?
Respuesta :
vidalmari6p99qfk
vidalmari6p99qfk
04-06-2018
Everything fine
except
5 les bras maigreS (les bras is plural)
6 un gros nez(nez is masculin singular)
8 une belle figure
9 une large bouche
Answer Link
pandamille
pandamille
04-06-2018
5-- Ils ont les bras maigres.
6-- J'ai un gros nez.
8 - Tu as une belle figure.
9 - On a une large bouche.
Answer Link
VER TODAS LAS RESPUESTAS ( 21+ )
Otras preguntas
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
